LICENSE

@@ -1,6 +1,3 @@
-MIT License
-
-Copyright (c) 2018 Guillaume P.
 Copyright (c) 2020 Joey Hines
 
 Permission is hereby granted, free of charge, to any person obtaining a copy

README.md

@@ -1,9 +1,7 @@
-# Rust Bluepill Template
+# Rust Template
 
 A template for my Rust projects. Uses [tmpl](https://git.jojodev.com/jolheiser/tmpl).
 
-Inspiration: [blue-pill-quickstart](https://github.com/TeXitoi/blue-pill-quickstart)
-
 ## License
 
 [MIT](LICENSE)

template/.cargo/config

@@ -1,7 +0,0 @@
-[target.thumbv7m-none-eabi]
-runner = "{{runner}}"
-
-rustflags = ["-C", "link-arg=-Tlink.x"]
-
-[build]
-target = "thumbv7m-none-eabi"

template/Cargo.toml

@@ -7,7 +7,3 @@ edition = "{{rust_edition}}"
 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
 
 [dependencies]
-stm32f1xx-hal = { version = "0.7", features = ["rt", "stm32f103" ] }
-cortex-m = "0.7"
-cortex-m-rt = { version = "0.6", features = ["device"] }
-panic-semihosting = "0.5"

template/memory.x

@@ -1,6 +0,0 @@
-/* Linker script for the STM32F103C8T6 */
-MEMORY
-{
-  FLASH : ORIGIN = 0x08000000, LENGTH = 64K
-  RAM : ORIGIN = 0x20000000, LENGTH = 20K
-}

template/openocd.cfg

@@ -1,2 +0,0 @@
-source [find interface/stlink-v2.cfg]
-source [find target/stm32f1x.cfg]

template/openocd.gdb

@@ -1,10 +0,0 @@
-target remote :3333
-set print asm-demangle on
-monitor arm semihosting enable
-
-# detect unhandled exceptions, hard faults and panics
-break DefaultHandler
-break HardFault
-break rust_begin_unwind
-
-load

template/src/main.rs

@@ -1,53 +1,3 @@
-//! Blinks an LED
+fn main() {
-//!
+    println!("Hello, world!");
-//! This assumes that a LED is connected to pc13 as is the case on the blue pill board.
-//!
-//! Note: Without additional hardware, PC13 should not be used to drive an LED, see page 5.1.2 of
-//! the reference manual for an explanation. This is not an issue on the blue pill.
-//! Taken from https://github.com/stm32-rs/stm32f1xx-hal/blob/master/examples/blinky.rs
-
-#![deny(unsafe_code)]
-#![no_std]
-#![no_main]
-
-use panic_halt as _;
-
-use nb::block;
-
-use cortex_m_rt::entry;
-use embedded_hal::digital::v2::OutputPin;
-use stm32f1xx_hal::{pac, prelude::*, timer::Timer};
-
-#[entry]
-fn main() -> ! {
-    // Get access to the core peripherals from the cortex-m crate
-    let cp = cortex_m::Peripherals::take().unwrap();
-    // Get access to the device specific peripherals from the peripheral access crate
-    let dp = pac::Peripherals::take().unwrap();
-
-    // Take ownership over the raw flash and rcc devices and convert them into the corresponding
-    // HAL structs
-    let mut flash = dp.FLASH.constrain();
-    let mut rcc = dp.RCC.constrain();
-
-    // Freeze the configuration of all the clocks in the system and store the frozen frequencies in
-    // `clocks`
-    let clocks = rcc.cfgr.freeze(&mut flash.acr);
-
-    // Acquire the GPIOC peripheral
-    let mut gpioc = dp.GPIOC.split(&mut rcc.apb2);
-
-    // Configure gpio C pin 13 as a push-pull output. The `crh` register is passed to the function
-    // in order to configure the port. For pins 0-7, crl should be passed instead.
-    let mut led = gpioc.pc13.into_push_pull_output(&mut gpioc.crh);
-    // Configure the syst timer to trigger an update every second
-    let mut timer = Timer::syst(cp.SYST, &clocks).start_count_down(1.hz());
-
-    // Wait for the timer to trigger an update and change the state of the LED
-    loop {
-        block!(timer.wait()).unwrap();
-        led.set_high().unwrap();
-        block!(timer.wait()).unwrap();
-        led.set_low().unwrap();
-    }
 }

tmpl.yaml

@@ -13,8 +13,4 @@ prompts:
     default: joey@ahines.net
   - id: rust_edition
     label: Rust Edition
-    default: "2021"
+    default: 2021
-  - id: runner
-    label: Run Command
-    default: "gdb-multiarch -q -x openocd.gdb"                    
-    help: "Command used by cargo run to start code on the target hw"